| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 3/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1. Preventing Loosening Due to Vibration: The primary function of the self-locking nut is to prevent fasteners from loosening under vibration and dynamic loads, keeping components secure and reducing wear. |
| 2. Providing Long-Lasting Fastening: Unlike regular nuts, the self-locking nut maintains its grip over time, ensuring a stable attachment even in high-stress areas. |
| 3. Supporting Key Components: Self-locking nuts are used to secure critical parts, such as engine mounts, control linkages, and brackets, which must remain firmly attached for safe and efficient operation. |
| 1. Regular Inspection: Check the self-locking nut periodically for signs of corrosion, thread wear, or looseness, particularly in areas subject to high stress and vibration. |
| 2. Replace When Worn: Over time, the locking mechanism may lose its effectiveness. If the nut no longer holds firmly, it should be replaced to ensure safe operation. |
| 3. Use Anti-Corrosion Lubricants: Applying a marine-grade anti-corrosion lubricant helps protect the nut from rust and corrosion, especially after exposure to saltwater. |
| 4. Avoid Over-Tightening: Over-tightening can damage the locking mechanism, especially in nylon-insert nuts, which could weaken their grip. Tighten only to the specified torque. |
| 5. Rinse After Saltwater Exposure: After saltwater use, rinse the self-locking nut with fresh water to remove salt deposits that can lead to corrosion. |
| 1. Loss of Locking Power: Over time, repeated use and wear may cause the nut's locking mechanism (such as the nylon insert) to degrade, leading to a reduced grip on the bolt. |
| 2. Corrosion: Exposure to saltwater and harsh marine conditions can lead to corrosion, which can weaken the nut and potentially cause it to seize or lose effectiveness. |
| 3. Thread Stripping: Excessive torque or over-tightening can strip the nut's internal threads, compromising its grip on the bolt and reducing its vibration resistance. |
| 4. Nylon Deformation (in Nylon-Insert Nuts): If exposed to extreme heat or prolonged use, the nylon insert may deform, which can reduce its effectiveness in resisting vibration. |
| PART NO. | DESCRIPTION |
| 676-43111-04-4D | BRACKET, CLAMP SOPORTE DE LA ABRAZADERA |
| 6F5-43114-00 | PAD, TRANSOM CLAMP ARANDELA DE ABRAZADERA |
| 6F5-43116-00 | SCREW, TRANSOM CLAMP TORNILLO DE ABRAZADERA |
| 663-43118-01-4D | HANDLE, TRANSOM CLAMP MANIJA DE LA ABRAZADERA DEL ES |
| 90243-04007 | PIN PASADOR |
| 90109-06M12 | BOLT PERNO |
| 676-43112-04-4D | BRACKET, CLAMP SOPORTE DE LA ABRAZADERA |
| 90116-08M00 | BOLT, STUD ESPARRAGO |
| 90387-08M02 | COLLAR COLLAR |
| 92990-08100 | WASHER, SPRING ARANDELA PLANA |
| 95380-08600 | NUT TUERCA |
| 676-43311-10-4D | BRACKET, SWIVEL 1 SOPORTE GIRATORIO 1 |
| 93700-06M03 | NIPPLE, GREASE BOQUILLA DE ENGRASAR |
| 663-45119-00 | CAP, GREASE NIPPLE TAPA DE GRASERA |
| 648-42528-00 | PLATE, FRICTION PIEZA DE FRICCION |
| 90501-18M00 | SPRING, COMPRESSION RESORTE DE COMPRESION |
| 676-43373-00 | SEAL, DAMPER SELLO DE GOMA |
| 97075-08025 | BOLT PERNO |
| 92995-08600 | WASHER ARANDELA |
| 6J8-43131-01 | BOLT, CLAMP BRACKET TORNILLO DE ABRAZADERA DEL SOP |
| 90386-22M15 | BUSH BUJE |
| 90201-22M03 | WASHER, PLATE ARANDELA PLANA |
| 6J8-43113-01 | PLATE, CLAMP BRACKET PLACA ABRAZADERA SOPORTE |
| 90185-22043 | NUT, SELF-LOCKING TUERCA AUTOBLOCANTE |
| 6G5-43145-01 | CAP, CLAMP BRACKET TAPA |
| 676-42511-02-4D | BRACKET, STEERING SOPORTE DE DIRECCION |
| 97075-08030 | BOLT PERNO |
| 92995-08100 | WASHER ARANDELA |
| 97075-08035 | BOLT PERNO |
| 92995-08100 | WASHER ARANDELA |
| 93608-12063 | PIN, DOWEL PASADOR DE CLAVIJA |
| 676-42521-00-94 | SHAFT, STEERING PIVOT EJE PIVOTE DE DIRECCION |
| 90209-52M00 | WASHER ARANDELA DE SEPARACION |
| 90201-44M01 | WASHER, PLATE ARANDELA PLANA |
| 90386-52M02 | BUSH BUJE |
| 90386-44M03 | BUSH BUJE |
| 93109-44M00 | OIL SEAL SELLO ACEITE |
| 676-44551-01-4D | HOUSING, LOWER MOUNT RUBBER CAJA AMORTIGUADOR INFERIOR HU |
| 676-44552-01-4D | HOUSING, LOWER MOUNT RUBBER CAJA AMORTIGUADOR INFERIOR HU |
| 676-44553-01-4D | COVER, LOWER MOUNT CUBIERTA,AMORTIGUADOR INFERIOR |
| 679-44555-00-94 | MOUNT DAMPER, LOWER SIDE AMORTIGUADOR DE HULE LADO INFE |
| 97075-08030 | BOLT PERNO |
| 92995-08100 | WASHER ARANDELA |
| 97095-08045 | BOLT PERNO |
| 92995-08100 | WASHER ARANDELA |
| 90101-12M01 | BOLT TORNILLO |
| 90201-12M16 | WASHER, PLATE ARANDELA PLANA |
| 90202-21100 | WASHER, PLATE ARANDELA DE PLANA |
| 90201-13M11 | WASHER, PLATE ARANDELA PLANA |
| 95380-12800 | NUT, CROWN TUERCA |
| 676-44575-00 | DAMPER, LOWER MOUNT RUBBER AMORTIGUADOR INFERIOR |
| 679-44514-00-94 | MOUNT DAMPER, UPPER SIDE AMORTIGUADOR LADO SUPERIOR |
| 90101-08M02 | BOLT TORNILLO |
| 90201-08M08 | WASHER, PLATE ARANDELA PLANA |
){kind=link}