| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
6B4-44150-00-00
Shift Cam Assy, Yamaha,
For Outboard: Yamaha 9.9, Yamaha 15
| 1. Precision Engineering: The shift cam is engineered to provide accurate control of gear changes, ensuring smooth transitions between forward, neutral, and reverse. |
| 2. Durable Design: It is designed to withstand the constant movement and pressure within the gear case, even under high load and speed conditions. |
| 3. Corrosion Resistance: Given its operation in marine environments, the shift cam assembly is made from materials resistant to rust and corrosion, ensuring a long lifespan. |
| 1. Gear Engagement Control: The main function of the shift cam assembly is to engage and disengage gears in the lower unit of the outboard motor. It controls the movement of the clutch dog, which selects either forward or reverse gears. |
| 2. Smooth Shifting: It ensures that gear shifts occur smoothly and precisely, which is essential for safe and efficient operation. Misaligned or improper gear shifts can cause damage to the gearbox and affect boat performance. |
| 3. Mechanical Coordination: The shift cam works in coordination with the shift rod and other components to translate the driver's input into mechanical action, seamlessly changing the boat's direction or bringing it to a stop. |
| 1. Regular Inspection: Periodically inspect the shift cam assembly for signs of wear, corrosion, or damage. Any wear on the cam's surface or misalignment can lead to improper gear engagement, causing performance issues or damage to the gear case. |
| 2. Lubrication: Ensure that the moving parts of the shift cam assembly are properly lubricated with marine-grade grease. This helps to reduce friction and wear while ensuring smooth operation of the shifting mechanism. |
| 3. Check for Smooth Shifts: If you experience hard shifting, gear slipping, or difficulty engaging reverse or forward gears, it could indicate wear on the shift cam. These are signs that maintenance or replacement might be necessary. |
| 4. Corrosion Prevention: After each use, especially in saltwater environments, flush the engine with fresh water to remove any salt deposits that may accelerate corrosion. This is particularly important in protecting the shift cam and related components. |
| 5. Replace Worn Parts Promptly: If any part of the shift cam assembly shows excessive wear or damage, it's important to replace it promptly to prevent further damage to the gearbox. |
| 1. Gear Slipping or Jamming: If the shift cam becomes worn or damaged, it may lead to the gears not fully engaging, causing the boat to slip out of gear or not engage properly when shifting. |
| 2. Hard Shifting: A stiff or difficult shift lever can be a sign that the shift cam is worn or improperly lubricated. This could also indicate a problem with the shift rod or cable, which works in conjunction with the shift cam. |
| 3. Noise During Gear Shifting: If you hear grinding or unusual noises during shifting, this may indicate an issue with the shift cam's engagement with the clutch dog or other internal components. |
| 4. Neutral Position Issues: If the engine does not easily find or hold the neutral position, it can be a sign that the shift cam is not aligned or functioning properly. |
| PART NO | DESCRIPTION |
| 6B4-45300-01-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
| 6B4-45300-11-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
| 6B4-45300-31-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
| 6E8-45311-01-4D | CASING, LOWER FUNDA INFERIOR |
| 6B4-44150-00 | SHIFT CAM ASSY CONJUNTO EJE LEVA COMPL |
| 6B4-44150-10 | SHIFT CAM ASSY CONJUNTO EJE LEVA COMPL |
| 6B4-44150-30 | SHIFT CAM ASSY CONJUNTO EJE LEVA COMPL |
| 6B4-44147-00 | BOOT, SHIFT ROD HULE DE VARILLA |
| 682-44176-00 | BRACKET SOPORTE |
| 97780-50110 | SCREW, TAPPING TORNILLO DE CABEZA DE CONO ACH |
| 93315-314V8 | BEARING COJINETE DE RODILLOS |
| 6E7-45536-00 | SLEEVE, DRIVE SHAFT CAMISA EJE DE MANDO |
| 90209-14011 | WASHER ARANDELA DE SEPARACION |
| 6E8-45587-10 | SHIM (T:113MM) LAINA (T:113MM) |
| 6E8-45587-30 | SHIM (T:120MM) LAINA (T:120MM) |
| 90201-15017 | WASHER, PLATE ARANDELA PLANA |
| 93332-00005 | BEARING COJINETE |
| 664-45567-01 | SHIM (T:010MM) LAINA (T:010MM) |
| 664-45567-10 | SHIM (T:012MM) LAINA (T:012MM) |
| 664-45567-20 | SHIM (T:015MM) LAINA (T:015MM) |
| 664-45567-30 | SHIM (T:018MM) LAINA (T:018MM) |
| 664-45567-40 | SHIM (T:030MM) LAINA (T:030MM) |
| 664-45567-50 | SHIM (T:040MM) LAINA (T:040MM) |
| 664-45567-60 | SHIM (T:050MM) LAINA (T:050MM) |
| 90340-08002 | PLUG, STRAIGHT SCREW TORNILLO, DE DRENAJE |
| 90430-08020 | GASKET JUNTA |
| 93604-08062 | PIN, DOWEL PASADOR DE CLAVIJA |
| 682-45376-01 | GUIDE, SEAL DAMPER GUIA DE SELLO GOMA |
| 682-44300-40 | HOUSING WATER PUMP ASSY BOMBA DE AGUA |
| 682-44312-00 | COVER, WATER PUMP HOUSING CUBIERTA CAJA BOMBA DE AGUA |
| 97780-40112 | SCREW, OVAL HEAD TAPPING TORNILLO DE CABEZA DE CONO ACH |
| 682-44365-00 | DAMPER, WATER SEAL HULE DE SELLO DE AGUA |
| 682-44322-41 | INSERT, CARTRIDGE CARTUCHO |
| 682-44352-03 | IMPELLER IMPULSOR |
| 90280-03005 | KEY, WOODRUFF CUNA WOODRUFF |
| 682-44315-A0 | GASKET, WATER PUMP EMPAQUE |
| 682-44323-40 | OUTER PLATE, CARTRIDGE PLACA EXTERIOR DEL CARTUCHO |
| 682-45344-00 | COVER, OIL SEAL CUBIERTA SELLO ACEITE |
| 97095-06045 | BOLT PERNO |
| 92995-06600 | WASHER ARANDELA |
| 682-44328-00 | PLATE PLACA |
| 6E7-45331-00-5B | HOUSING, BEARING CAJA DE COJINETE |
| 626-45316-09 | BUSHING, DRIVE SHAFT BUJE, EJE DE MANDO |
| 93101-20001 | OIL SEAL SELLO ACEITE |
| 683-45315-A0 | PACKING, LOWER CASING EMPAQUE |
| 93606-12019 | PIN, DOWEL PASADOR DE CLAVIJA |
| 683-44362-01 | TUBE, WATER TUBO DE AGUA |
| 683-44365-01 | DAMPER, WATER SEAL HULE DE SELLO DE AGUA |
| 683-44373-00 | SET PLATE, WATER TUBE PLACA PARA FIJAR TUBO |
| 97095-06010 | BOLT PERNO |
| 6E7-44366-00 | DAMPER, WATER SEAL GOMA DEL SELLO DE AGUA |
| 6B4-45501-00 | DRIVE SHAFT COMP EJE DE MANDO COMPL |
| 6B4-45501-10 | DRIVE SHAFT COMP EJE DE MANDO COMPL |
| 6B4-45501-30 | DRIVE SHAFT COMP EJE DE MANDO COMPL |
| 63V-45551-00 | PINION (13T) PINON (13T) |
| 90179-08M06 | NUT TUERCA |
| 6E7-45560-01 | GEAR 1 (27T) ENGRANAJE 1 (27T) |
| 6E7-45571-00 | GEAR 2 (27T) ENGRANAJE 2 (27T) |
| 626-45577-00 | SHIM (T:010MM) LAINA (T:010MM) |
| 626-45577-10 | SHIM (T:020MM) LAINA (T:020MM) |
| 626-45577-20 | SHIM (T:030MM) LAINA (T:030MM) |
| 626-45577-30 | SHIM (T:040MM) LAINA (T:040MM) |
| 626-45577-40 | SHIM (T:050MM) LAINA (T:050MM) |
| 90201-17682 | WASHER, PLATE ARANDELA PLANA |
| 683-45611-00 | SHAFT, PROPELLER EJE PROPUSOR |
| 650-45635-00 | PLUNGER, SHIFT EMBOLO DE CAMBIO |
| 682-45631-00 | CLUTCH, DOG EMBRAGUE DE GARRA |
| 90250-05010 | PIN, STRAIGHT PASADOR CILINDRICO |
| 648-45633-00 | RING, CROSS PIN ANILLO DE PASADOR |
| 90501-14M06 | SPRING, COMPRESSION RESORTE DE COMPRESION |
| 683-45361-02-4D | CAP, LOWER CASING FUNDA INFERIOR |
| 6B4-45361-00-4D | CAP, LOWER CASING FUNDA INFERIOR |
| 93306-00501 | BEARING COJINETE |
| 93315-317U2 | BEARING COJINETE DE RODILLOS |
| 93101-17001 | OIL SEAL SELLO ACEITE |
| 93210-57M09 | O-RING ANILLO O |
| 93210-56M80 | O-RING ANILLO O |
| 97095-06020 | BOLT PERNO |
| 92995-06600 | WASHER ARANDELA |
){kind=link}