| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 8/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1. Robust Construction: Bearing housings are designed to be sturdy and durable, capable of withstanding high levels of stress, vibration, and corrosion in a marine environment. |
| 2. Precision Machining: The housing is precisely machined to ensure a proper fit for the bearings and other components, minimizing play and wear over time. |
| 3. Multiple Mounting Points: Bearing housings often have multiple mounting points for securing them to the engine or other structures, ensuring stability during operation. |
| 4. Integrated Sealing Mechanisms: Many bearing housings come with built-in seals or O-rings to prevent contaminants from entering the bearing area, protecting against dirt and moisture. |
| 1. Support and Alignment: The primary function of the bearing housing is to provide support and alignment for the bearings, ensuring they operate smoothly and efficiently. |
| 2. Load Distribution: It helps distribute the load evenly across the bearings, reducing stress and wear on individual components, which enhances overall reliability. |
| 3. Protection: The housing protects the bearings from environmental factors such as water, dirt, and debris, which could otherwise lead to premature failure. |
| 4. Heat Dissipation: In some designs, the bearing housing aids in dissipating heat generated during operation, contributing to the overall thermal management of the engine. |
| 1. Regular Inspection: Periodically check the bearing housing for signs of wear, corrosion, or damage. Look for any cracks, leaks, or loose fittings that may compromise its integrity. |
| 2. Check Seals and Gaskets: Inspect the seals and gaskets for signs of wear or deterioration. Replace any damaged seals to prevent contaminants from entering the bearing area. |
| 3. Lubrication: Ensure that the bearings within the housing are adequately lubricated with the appropriate grease or oil as recommended by Yamaha. Proper lubrication reduces friction and wear. |
| 4. Monitor for Noise or Vibration: Listen for unusual noises or vibrations during operation, which can indicate issues with the bearings or housing. Address any concerns promptly to prevent further damage. |
| 5. Clean Regularly: After operating in saltwater or harsh conditions, clean the bearing housing to remove any salt, sand, or debris that may have accumulated, preventing corrosion. |
| PART NO | DESCRIPTION |
| 6B4-45300-01-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
| 6B4-45300-11-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
| 6B4-45300-31-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
| 6E8-45311-01-4D | CASING, LOWER FUNDA INFERIOR |
| 6B4-44150-00 | SHIFT CAM ASSY CONJUNTO EJE LEVA COMPL |
| 6B4-44150-10 | SHIFT CAM ASSY CONJUNTO EJE LEVA COMPL |
| 6B4-44150-30 | SHIFT CAM ASSY CONJUNTO EJE LEVA COMPL |
| 6B4-44147-00 | BOOT, SHIFT ROD HULE DE VARILLA |
| 682-44176-00 | BRACKET SOPORTE |
| 97780-50110 | SCREW, TAPPING TORNILLO DE CABEZA DE CONO ACH |
| 93315-314V8 | BEARING COJINETE DE RODILLOS |
| 6E7-45536-00 | SLEEVE, DRIVE SHAFT CAMISA EJE DE MANDO |
| 90209-14011 | WASHER ARANDELA DE SEPARACION |
| 6E8-45587-10 | SHIM (T:113MM) LAINA (T:113MM) |
| 6E8-45587-30 | SHIM (T:120MM) LAINA (T:120MM) |
| 90201-15017 | WASHER, PLATE ARANDELA PLANA |
| 93332-00005 | BEARING COJINETE |
| 664-45567-01 | SHIM (T:010MM) LAINA (T:010MM) |
| 664-45567-10 | SHIM (T:012MM) LAINA (T:012MM) |
| 664-45567-20 | SHIM (T:015MM) LAINA (T:015MM) |
| 664-45567-30 | SHIM (T:018MM) LAINA (T:018MM) |
| 664-45567-40 | SHIM (T:030MM) LAINA (T:030MM) |
| 664-45567-50 | SHIM (T:040MM) LAINA (T:040MM) |
| 664-45567-60 | SHIM (T:050MM) LAINA (T:050MM) |
| 90340-08002 | PLUG, STRAIGHT SCREW TORNILLO, DE DRENAJE |
| 90430-08020 | GASKET JUNTA |
| 93604-08062 | PIN, DOWEL PASADOR DE CLAVIJA |
| 682-45376-01 | GUIDE, SEAL DAMPER GUIA DE SELLO GOMA |
| 682-44300-40 | HOUSING WATER PUMP ASSY BOMBA DE AGUA |
| 682-44312-00 | COVER, WATER PUMP HOUSING CUBIERTA CAJA BOMBA DE AGUA |
| 97780-40112 | SCREW, OVAL HEAD TAPPING TORNILLO DE CABEZA DE CONO ACH |
| 682-44365-00 | DAMPER, WATER SEAL HULE DE SELLO DE AGUA |
| 682-44322-41 | INSERT, CARTRIDGE CARTUCHO |
| 682-44352-03 | IMPELLER IMPULSOR |
| 90280-03005 | KEY, WOODRUFF CUNA WOODRUFF |
| 682-44315-A0 | GASKET, WATER PUMP EMPAQUE |
| 682-44323-40 | OUTER PLATE, CARTRIDGE PLACA EXTERIOR DEL CARTUCHO |
| 682-45344-00 | COVER, OIL SEAL CUBIERTA SELLO ACEITE |
| 97095-06045 | BOLT PERNO |
| 92995-06600 | WASHER ARANDELA |
| 682-44328-00 | PLATE PLACA |
| 6E7-45331-00-5B | HOUSING, BEARING CAJA DE COJINETE |
| 626-45316-09 | BUSHING, DRIVE SHAFT BUJE, EJE DE MANDO |
| 93101-20001 | OIL SEAL SELLO ACEITE |
| 683-45315-A0 | PACKING, LOWER CASING EMPAQUE |
| 93606-12019 | PIN, DOWEL PASADOR DE CLAVIJA |
| 683-44362-01 | TUBE, WATER TUBO DE AGUA |
| 683-44365-01 | DAMPER, WATER SEAL HULE DE SELLO DE AGUA |
| 683-44373-00 | SET PLATE, WATER TUBE PLACA PARA FIJAR TUBO |
| 97095-06010 | BOLT PERNO |
| 6E7-44366-00 | DAMPER, WATER SEAL GOMA DEL SELLO DE AGUA |
| 6B4-45501-00 | DRIVE SHAFT COMP EJE DE MANDO COMPL |
| 6B4-45501-10 | DRIVE SHAFT COMP EJE DE MANDO COMPL |
| 6B4-45501-30 | DRIVE SHAFT COMP EJE DE MANDO COMPL |
| 63V-45551-00 | PINION (13T) PINON (13T) |
| 90179-08M06 | NUT TUERCA |
| 6E7-45560-01 | GEAR 1 (27T) ENGRANAJE 1 (27T) |
| 6E7-45571-00 | GEAR 2 (27T) ENGRANAJE 2 (27T) |
| 626-45577-00 | SHIM (T:010MM) LAINA (T:010MM) |
| 626-45577-10 | SHIM (T:020MM) LAINA (T:020MM) |
| 626-45577-20 | SHIM (T:030MM) LAINA (T:030MM) |
| 626-45577-30 | SHIM (T:040MM) LAINA (T:040MM) |
| 626-45577-40 | SHIM (T:050MM) LAINA (T:050MM) |
| 90201-17682 | WASHER, PLATE ARANDELA PLANA |
| 683-45611-00 | SHAFT, PROPELLER EJE PROPUSOR |
| 650-45635-00 | PLUNGER, SHIFT EMBOLO DE CAMBIO |
| 682-45631-00 | CLUTCH, DOG EMBRAGUE DE GARRA |
| 90250-05010 | PIN, STRAIGHT PASADOR CILINDRICO |
| 648-45633-00 | RING, CROSS PIN ANILLO DE PASADOR |
| 90501-14M06 | SPRING, COMPRESSION RESORTE DE COMPRESION |
| 683-45361-02-4D | CAP, LOWER CASING FUNDA INFERIOR |
| 6B4-45361-00-4D | CAP, LOWER CASING FUNDA INFERIOR |
| 93306-00501 | BEARING COJINETE |
| 93315-317U2 | BEARING COJINETE DE RODILLOS |
| 93101-17001 | OIL SEAL SELLO ACEITE |
| 93210-57M09 | O-RING ANILLO O |
| 93210-56M80 | O-RING ANILLO O |
| 97095-06020 | BOLT PERNO |
| 92995-06600 | WASHER ARANDELA |
){kind=link}