| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 10/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1. Its primary function is to circulate water through the engine's cooling system, which is essential for maintaining the engine's optimal operating temperature and preventing overheating. |
| 2. As the impeller spins within the water pump housing, it draws water from the lake, river, or ocean and forces it through the engine's cooling passages. |
| 3. This continuous flow of water absorbs and dissipates heat generated by the engine, ensuring reliable and efficient operation. |
| 1. High-Performance Design: The impeller is designed with multiple blades that efficiently draw water into the cooling system, ensuring a consistent and strong water flow at various engine speeds. |
| 2. Corrosion-Resistant Materials: The rubber and any metal components are selected for their resistance to corrosion, making the impeller suitable for use in both freshwater and saltwater environments. |
| 3. Precision Fit: Engineered to fit perfectly within the pump housing of specific Yamaha outboard models, ensuring optimal performance and preventing leaks. |
| 4. Flexible Blades: The impeller blades are flexible, allowing them to bend and conform under pressure, which helps to maintain a tight seal and effective water pumping action. |
| 1. Regular Inspection: Routinely inspect the impeller, especially before the boating season or after prolonged use, to check for signs of wear, cracks, or missing blades. |
| 2. Replace Annually or as Needed: It is generally recommended to replace the impeller annually or every 100 hours of operation, whichever comes first, especially if the motor is frequently used in shallow, sandy, or debris-filled waters. |
| 3. Proper Installation: When installing a new impeller, ensure it is correctly positioned within the pump housing, with the blades oriented in the correct direction to match the engine's rotation. |
| 4. Lubricate During Installation: Apply a small amount of water-resistant grease to the impeller blades before installation to ease the initial start-up and prevent dry friction, which can cause damage. |
| 5. Flush After Each Use: Flush the cooling system with fresh water after each use, especially if operating in saltwater, to remove debris, sand, and salt deposits that can damage the impeller. |
| 6. Check Pump Housing: Inspect the pump housing for signs of wear or damage. A worn or damaged housing can affect impeller performance and should be replaced if necessary. |
| 1. Overheating Engine: One of the most obvious signs of impeller failure is engine overheating, which occurs when water is not circulating properly. |
| 2. Reduced Water Flow from Cooling System Indicator (Tell-Tale): A weak or nonexistent tell-tale stream is a strong indicator that the impeller may be worn or damaged. |
| 3. Unusual Engine Noise: A damaged impeller can cause unusual noises from the water pump due to broken or misaligned blades. |
| 69D-45300-01-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
| 69D-45300-11-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
| 69D-45300-21-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
| 6H1-45301-03-4D | CASING, LOWER FUNDA INFERIOR COMPLETA |
| 93315-325V1 | BEARING COJINETE DE RODILLOS |
| 688-45536-01 | SLEEVE, DRIVE SHAFT CAMISA EJE DE MANDO |
| 688-45587-01 | SHIM (T:0.10MM) LAINA (T:0.10MM) |
| 688-45587-10 | SHIM (T:0.12MM) LAINA (T:0.12MM) |
| 688-45587-20 | SHIM (T:0.15MM) LAINA (T:0.15MM) |
| 688-45587-30 | SHIM (T:0.18MM) LAINA (T:0.18MM) |
| 688-45587-40 | SHIM (T:0.30MM) LAINA (T:0.30MM) |
| 688-45587-50 | SHIM (T:0.40MM) LAINA (T:0.40MM) |
| 688-45587-60 | SHIM (T:0.50MM) LAINA (T:0.50MM) |
| 93332-000U3 | BEARING COJINETE |
| 688-45567-01 | SHIM (T:0.10MM) LAINA (T:0.10MM) |
| 688-45567-10 | SHIM (T:0.12MM) LAINA (T:0.12MM) |
| 688-45567-20 | SHIM (T:0.15MM) LAINA (T:0.15MM) |
| 688-45567-30 | SHIM (T:0.18MM) LAINA (T:0.18MM) |
| 688-45567-40 | SHIM (T:0.30MM) LAINA (T:0.30MM) |
| 688-45567-50 | SHIM (T:0.40MM) LAINA (T:0.40MM) |
| 688-45567-60 | SHIM (T:0.50MM) LAINA (T:0.50MM) |
| 93332-000W7 | BEARING COJINETE |
| 90340-08002 | PLUG, STRAIGHT SCREW TORNILLO, DE DRENAJE |
| 688-45341-10 | PLUG, DRAIN TAPON, DREN |
| 90430-08020 | GASKET JUNTA |
| 6H1-45214-00 | COVER, WATER INLET 1 CUBIERTA ENTRADA AGUA 1 |
| 6H1-45215-00 | COVER, WATER INLET 2 CUBIERTA ENTRADA AGUA 2 |
| 90151-05M00 | SCREW, COUNTERSUNK TORNILLO EMBUTIDO |
| 90185-05002 | NUT, NYLON TUERCA AUTOBLOCANTE |
| 688-45321-00 | PLATE PLACA |
| 93210-49046 | O-RING ANILLO O |
| 93106-09014 | OIL SEAL SELLO ACEITE |
| 97095-06016 | BOLT PERNO |
| 92995-06600 | WASHER ARANDELA |
| 6J8-45378-00 | NIPPLE, HOSE (PLUG) NIPLE MANGUERA (TAPON) |
| 688-44311-01 | HOUSING, WATER PUMP CAJA BOMBA DE AGUA |
| 69D-44322-00 | INSERT, CARTRIDGE CARTUCHO |
| 688-44315-A0 | GASKET, WATER PUMP EMPAQUE |
| 688-44352-03 | IMPELLER IMPULSOR |
| 90280-04M04 | KEY, WOODRUFF CUNA WOODRUFF |
| 6D8-44341-01-CA | HOUSING, WATER PUMP CAJA BOMBA DE AGUA |
| 93450-44166 | CIRCLIP SEGURO |
| 93101-25M03 | OIL SEAL SELLO ACEITE |
| 93210-46044 | O-RING ANILLO O |
| 688-44316-A0 | GASKET, WATER PUMP EMPAQUE |
| 688-44323-40 | OUTER PLATE, CARTRIDGE PLACA EXTERIOR DEL CARTUCHO |
| 688-44324-A0 | GASKET, CARTRIDGE EMPAQUE |
| 93604-10M03 | PIN, DOWEL PASADOR DE CLAVIJA |
| 90119-08M16 | BOLT, WITH WASHER TORNILLO CON ARANDELA |
| 90119-08M13 | BOLT, WITH WASHER TORNILLO CON ARANDELA |
| 69D-45501-00 | DRIVE SHAFT COMP. EJE DE MANDO COMPL. |
| 69D-45501-10 | DRIVE SHAFT COMP. EJE DE MANDO COMPL. |
| 69D-45501-20 | DRIVE SHAFT COMP. EJE DE MANDO COMPL. |
| 6K5-45551-00 | PINION (12T) PINON (12T) |
| 90170-16M01 | NUT TUERCA |
| 6K5-45560-00 | GEAR 1 (28T) ENGRANAJE 1 (28T) |
| 6H1-45611-01 | SHAFT, PROPELLER EJE PROPUSOR |
| 6H1-45631-01 | CLUTCH, DOG EMBRAGUE DE GARRA |
| 93603-12M11 | PIN, DOWEL PASADOR DE CLAVIJA |
| 6H1-45634-02 | SLIDE, SHIFT DESLIZADOR, CAMBIO |
| 90501-16M65 | SPRING, COMPRESSION RESORTE DE COMPRESION |
| 93503-16003 | BALL ESFERA |
| 6H1-45668-00 | SHAFT, FREE EJE |
| 6H1-45635-00 | PLUNGER, SHIFT EMBOLO DE CAMBIO |
| 90501-12M48 | SPRING, COMPRESSION RESORTE DE COMPRESION |
| 90201-03313 | WASHER, PLATE ARANDELA PLANA |
| 90183-02M03 | NUT, SPRING TUERCA DE RESORTE |
| 90250-07M02 | PIN, STRAIGHT PASADOR CILINDRICO |
| 688-45633-00 | RING, CROSS PIN ANILLO DE PASADOR |
| 6H1-45641-01 | SHIFTER CAMBIO |
| 6H1-44151-00 | CAM, SHIFT LEVA DE CAMBIO |
| 6H1-44144-00 | ROD, SHIFT VARILLA DE CAMBIO |
| 93210-07003 | O-RING ANILLO O |
| 99001-08600 | CIRCLIP PRESILLA REDONDA |
| 93450-07M00 | CIRCLIP SEGURO |
| 6H3-45571-00 | GEAR (28T) ENGRANAJE (28T) |
| 688-45331-00-94 | HOUSING, BEARING CAJA DE COJINETE |
| 93306-207U0 | BEARING COJINETE |
| 688-45577-01 | SHIM (T:0.10MM) LAINA (T:0.10MM) |
| 688-45577-10 | SHIM (T:0.12MM) LAINA (:0.12MM) |
| 688-45577-20 | SHIM (T:0.15MM) LAINA (T:0.15MM) |
| 688-45577-30 | SHIM (T:0.18MM) LAINA (T:0.18MM) |
| 688-45577-40 | SHIM (T:0.30MM) LAINA (T:0.30MM) |
| 688-45577-50 | SHIM (T:0.40MM) LAINA (T:0.40MM) |
| 688-45577-60 | SHIM (T:0.50MM) LAINA (T:0.50MM) |
| 688-45576-00 | WASHER, THRUST ARANDELA DE EMPUJE AXIAL |
| 93210-85M97 | O-RING ANILLO O |
| 93317-325U0 | BEARING COJINETE |
| 93101-25M03 | OIL SEAL SELLO ACEITE |
| 90282-04010 | KEY, STRAIGHT CHAVETA, RECTA |
| 688-45383-02 | WASHER, CLAW ARANDELA DE UNA |
| 688-45384-00 | NUT TUERCA |
){kind=link}