| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 32/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1. Power Transmission: The primary function of the propeller shaft is to transfer rotational power from the engine's gearbox to the propeller, driving the boat forward or backward depending on the gear selected. |
| 2. Supports the Propeller: The shaft securely holds the propeller in place, ensuring it remains aligned and operates efficiently without wobbling or excessive vibration. |
| 3. Torque Handling: It handles the torque generated by the engine, ensuring smooth and efficient power delivery even under high loads or during rapid acceleration. |
| 1. Precision Engineering: The shaft is precisely machined to ensure a smooth, balanced rotation, which minimizes vibrations and maximizes performance. |
| 2. Splined Ends: The shaft typically features splines at one or both ends for secure attachment to the gearbox and the propeller, ensuring a reliable fit and effective power transfer. |
| 3. Corrosion Resistance: The propeller shaft is designed to resist corrosion from constant exposure to water, especially saltwater, enhancing its longevity and performance. |
| 4. Shock Absorption: It's designed to withstand the impacts and shocks from hitting objects in the water, reducing the likelihood of damage to the drivetrain and engine. |
| 1. Regular Inspection: Inspect the shaft regularly for signs of wear, corrosion, pitting, or bends. Damage can lead to vibration, reduced performance, or propeller damage. |
| 2. Lubrication: Ensure the splines are properly greased during maintenance to prevent wear and corrosion. Use marine-grade grease designed for high-load applications. |
| 3. Check Alignment: Make sure the propeller is correctly aligned and balanced on the shaft to avoid undue stress that could lead to shaft or propeller damage. |
| 4. Avoid Impacts: Be cautious when navigating in shallow waters or near underwater obstacles to prevent impacts that could damage the propeller shaft. |
| 5. Replace Damaged Seals: Check the propeller shaft seals regularly and replace them if they show signs of wear or leakage. Worn seals can allow water to enter the lower unit, leading to internal corrosion and damage. |
| 6. Remove Debris: Routinely check for fishing lines, weeds, or debris wrapped around the shaft, as these can damage seals or cause excessive wear. |
| 7. Regular Propeller Removal: Periodically remove the propeller to inspect the shaft and the splines for wear or damage. This also allows you to check for fishing lines or other debris. |
| 69D-45300-01-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
| 69D-45300-11-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
| 69D-45300-21-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
| 6H1-45301-03-4D | CASING, LOWER FUNDA INFERIOR COMPLETA |
| 93315-325V1 | BEARING COJINETE DE RODILLOS |
| 688-45536-01 | SLEEVE, DRIVE SHAFT CAMISA EJE DE MANDO |
| 688-45587-01 | SHIM (T:0.10MM) LAINA (T:0.10MM) |
| 688-45587-10 | SHIM (T:0.12MM) LAINA (T:0.12MM) |
| 688-45587-20 | SHIM (T:0.15MM) LAINA (T:0.15MM) |
| 688-45587-30 | SHIM (T:0.18MM) LAINA (T:0.18MM) |
| 688-45587-40 | SHIM (T:0.30MM) LAINA (T:0.30MM) |
| 688-45587-50 | SHIM (T:0.40MM) LAINA (T:0.40MM) |
| 688-45587-60 | SHIM (T:0.50MM) LAINA (T:0.50MM) |
| 93332-000U3 | BEARING COJINETE |
| 688-45567-01 | SHIM (T:0.10MM) LAINA (T:0.10MM) |
| 688-45567-10 | SHIM (T:0.12MM) LAINA (T:0.12MM) |
| 688-45567-20 | SHIM (T:0.15MM) LAINA (T:0.15MM) |
| 688-45567-30 | SHIM (T:0.18MM) LAINA (T:0.18MM) |
| 688-45567-40 | SHIM (T:0.30MM) LAINA (T:0.30MM) |
| 688-45567-50 | SHIM (T:0.40MM) LAINA (T:0.40MM) |
| 688-45567-60 | SHIM (T:0.50MM) LAINA (T:0.50MM) |
| 93332-000W7 | BEARING COJINETE |
| 90340-08002 | PLUG, STRAIGHT SCREW TORNILLO, DE DRENAJE |
| 688-45341-10 | PLUG, DRAIN TAPON, DREN |
| 90430-08020 | GASKET JUNTA |
| 6H1-45214-00 | COVER, WATER INLET 1 CUBIERTA ENTRADA AGUA 1 |
| 6H1-45215-00 | COVER, WATER INLET 2 CUBIERTA ENTRADA AGUA 2 |
| 90151-05M00 | SCREW, COUNTERSUNK TORNILLO EMBUTIDO |
| 90185-05002 | NUT, NYLON TUERCA AUTOBLOCANTE |
| 688-45321-00 | PLATE PLACA |
| 93210-49046 | O-RING ANILLO O |
| 93106-09014 | OIL SEAL SELLO ACEITE |
| 97095-06016 | BOLT PERNO |
| 92995-06600 | WASHER ARANDELA |
| 6J8-45378-00 | NIPPLE, HOSE (PLUG) NIPLE MANGUERA (TAPON) |
| 688-44311-01 | HOUSING, WATER PUMP CAJA BOMBA DE AGUA |
| 69D-44322-00 | INSERT, CARTRIDGE CARTUCHO |
| 688-44315-A0 | GASKET, WATER PUMP EMPAQUE |
| 688-44352-03 | IMPELLER IMPULSOR |
| 90280-04M04 | KEY, WOODRUFF CUNA WOODRUFF |
| 6D8-44341-01-CA | HOUSING, WATER PUMP CAJA BOMBA DE AGUA |
| 93450-44166 | CIRCLIP SEGURO |
| 93101-25M03 | OIL SEAL SELLO ACEITE |
| 93210-46044 | O-RING ANILLO O |
| 688-44316-A0 | GASKET, WATER PUMP EMPAQUE |
| 688-44323-40 | OUTER PLATE, CARTRIDGE PLACA EXTERIOR DEL CARTUCHO |
| 688-44324-A0 | GASKET, CARTRIDGE EMPAQUE |
| 93604-10M03 | PIN, DOWEL PASADOR DE CLAVIJA |
| 90119-08M16 | BOLT, WITH WASHER TORNILLO CON ARANDELA |
| 90119-08M13 | BOLT, WITH WASHER TORNILLO CON ARANDELA |
| 69D-45501-00 | DRIVE SHAFT COMP. EJE DE MANDO COMPL. |
| 69D-45501-10 | DRIVE SHAFT COMP. EJE DE MANDO COMPL. |
| 69D-45501-20 | DRIVE SHAFT COMP. EJE DE MANDO COMPL. |
| 6K5-45551-00 | PINION (12T) PINON (12T) |
| 90170-16M01 | NUT TUERCA |
| 6K5-45560-00 | GEAR 1 (28T) ENGRANAJE 1 (28T) |
| 6H1-45611-01 | SHAFT, PROPELLER EJE PROPUSOR |
| 6H1-45631-01 | CLUTCH, DOG EMBRAGUE DE GARRA |
| 93603-12M11 | PIN, DOWEL PASADOR DE CLAVIJA |
| 6H1-45634-02 | SLIDE, SHIFT DESLIZADOR, CAMBIO |
| 90501-16M65 | SPRING, COMPRESSION RESORTE DE COMPRESION |
| 93503-16003 | BALL ESFERA |
| 6H1-45668-00 | SHAFT, FREE EJE |
| 6H1-45635-00 | PLUNGER, SHIFT EMBOLO DE CAMBIO |
| 90501-12M48 | SPRING, COMPRESSION RESORTE DE COMPRESION |
| 90201-03313 | WASHER, PLATE ARANDELA PLANA |
| 90183-02M03 | NUT, SPRING TUERCA DE RESORTE |
| 90250-07M02 | PIN, STRAIGHT PASADOR CILINDRICO |
| 688-45633-00 | RING, CROSS PIN ANILLO DE PASADOR |
| 6H1-45641-01 | SHIFTER CAMBIO |
| 6H1-44151-00 | CAM, SHIFT LEVA DE CAMBIO |
| 6H1-44144-00 | ROD, SHIFT VARILLA DE CAMBIO |
| 93210-07003 | O-RING ANILLO O |
| 99001-08600 | CIRCLIP PRESILLA REDONDA |
| 93450-07M00 | CIRCLIP SEGURO |
| 6H3-45571-00 | GEAR (28T) ENGRANAJE (28T) |
| 688-45331-00-94 | HOUSING, BEARING CAJA DE COJINETE |
| 93306-207U0 | BEARING COJINETE |
| 688-45577-01 | SHIM (T:0.10MM) LAINA (T:0.10MM) |
| 688-45577-10 | SHIM (T:0.12MM) LAINA (:0.12MM) |
| 688-45577-20 | SHIM (T:0.15MM) LAINA (T:0.15MM) |
| 688-45577-30 | SHIM (T:0.18MM) LAINA (T:0.18MM) |
| 688-45577-40 | SHIM (T:0.30MM) LAINA (T:0.30MM) |
| 688-45577-50 | SHIM (T:0.40MM) LAINA (T:0.40MM) |
| 688-45577-60 | SHIM (T:0.50MM) LAINA (T:0.50MM) |
| 688-45576-00 | WASHER, THRUST ARANDELA DE EMPUJE AXIAL |
| 93210-85M97 | O-RING ANILLO O |
| 93317-325U0 | BEARING COJINETE |
| 93101-25M03 | OIL SEAL SELLO ACEITE |
| 90282-04010 | KEY, STRAIGHT CHAVETA, RECTA |
| 688-45383-02 | WASHER, CLAW ARANDELA DE UNA |
| 688-45384-00 | NUT TUERCA |
){kind=link}