Detailed Photos
Installation Instructions
Product Description
63D-45214-00-00
Cover, Water Inlet 1, Yamaha,
For Outboard: Yamaha FT25, Yamaha FT50, Yamaha 40, Yamaha 50, Yamaha F25, Yamaha F30, Yamaha F40, Yamaha F45, Yamaha F50, Yamaha F60
63D-45215-00-00
Cover, Water Inlet 2, Yamaha,
For Outboard: Yamaha FT25, Yamaha FT50, Yamaha 40, Yamaha 50, Yamaha F25, Yamaha F30, Yamaha F40, Yamaha F45, Yamaha F50, Yamaha F60
Features:
| 1. Protective Shielding: Covers the water intake ports to prevent debris, sand, and vegetation from entering the cooling system. |
| 2. Multi-Slot Design: Constructed with slots or mesh to maximize water flow while blocking large particles. |
| 3. Corrosion-Resistant Material: Made from stainless steel or high-density plastic to resist corrosion in both freshwater and saltwater environments. |
| 4. Streamlined Build: Designed to fit snugly onto the motor's intake area to ensure no gaps are left that might allow debris to pass through. |
Functions:
| 1. Cooling System Protection: The intake cover keeps foreign objects out of the cooling system, reducing the risk of blockages that can lead to overheating. |
| 2. Ensuring Consistent Water Flow: Allows clean water to pass through to the cooling system, ensuring the engine remains at optimal operating temperatures. |
| 3. Debris Management: Prevents vegetation, rocks, and other debris from clogging the water intake, especially in debris-heavy environments. |
Maintenance Tips:
| 1. Rinse Regularly: After use, especially in saltwater or areas with heavy debris, rinse the intake cover with fresh water to clear any salt or dirt. |
| 2. Clear Clogs Promptly: Use a soft brush to remove any visible buildup within the slots of the intake cover. |
| 3. Avoid Debris-Heavy Areas: Operating in shallow or debris-laden waters can quickly clog or damage the cover, so avoid these areas whenever possible. |
| 4. Inspect for Secure Fit: Ensure the cover is tightly attached to prevent it from becoming loose during operation. |
| 5. Replace When Worn: If cracks or excessive wear appear on the intake cover, replace it to maintain adequate protection for the cooling system. |
Common Signs of Failure:
| 1. Reduced Water Flow: If water flow from the telltale (water stream indicator) is weak or erratic, the intake cover may be clogged, restricting water from entering the cooling system. |
| 2. Overheating Engine: Frequent overheating, even in normal operating conditions, can indicate that the intake cover is allowing debris to bypass or it's clogged, limiting water flow. |
| 3. Vibrations or Noises: Vibrations from the lower unit or unusual sounds during operation may suggest that the intake cover is loose or damaged. |
| 4. Visible Cracks or Wear: Cracks, corrosion, or physical wear on the intake cover indicate it may no longer be providing effective protection against debris. |
More Products We Have:
| BEARING |
HOUSING,WATER PUMP |
| BOLT / SCREW |
IMPELLER |
| BUSHING / COLLAR |
VALVE / JET,MAIN |
| BRACKET |
KEY,WOODRUFF |
| CABLE, REMOTE/STEERING / |
MOUNT DAMPER |
| THROTTLE/STEERING SYSTEM |
NUT |
| CAP LOWER CASING |
OIL SEAL |
| CARBURETOR ASSY / REPAIR KIT |
O-RING |
| CDI / CABLE,BATTERY / RELAY ASSY |
OUTER PLATE |
| COIL / PLUG,SPARK |
PIN,CROSS/DRIVE/ |
| CARTRIDGE INSERT |
STRAIGHT/COTTER |
| CLIP |
PISTON |
| CLUTCH DOG / BALL |
PISTON PIN |
| CONNECTING ROD |
PISTON RING |
| CRANK PIN |
PROPELLER |
| CRANKSHAFT |
PROPELLER SHAFT |
| DIAPHRAGM |
WATER PUMP REPAIR KIT |
| DAMPER, WATER SEAL |
REMOTE CONTROL ASSY |
| DRIVE SHAFT |
SEAL,LABYRINTH |
| FILTER |
SLEEVE LINER |
| FUEL PUMP |
SPACER |
| FUEL PARTS |
SPRING |
| FLOAT |
STARTER |
| GASKET |
SWITCH ASSY |
| GASKET KIT |
THERMOSTAT |
| GEAR / PINION ASSY |
WASHER/SHIM |
| TAB-TRIM |
ANODEIN |
| NEW GEAR |
|
Company Profile
Audited Supplier 
){kind=link}