Detailed Photos
Installation Instructions
Product Description
6G1-15755-00-00
Handle, Starter, Yamaha,
For Outboard: Yamaha FT9.9, Yamaha FT8, Yamaha F13.5, Yamaha F9.9, Yamaha F5, Yamaha F2.5, Yamaha 13.5, Yamaha 9.9, Yamaha 15, Yamaha 4, Yamaha 5, Yamaha 6, Yamaha 8, Yamaha F15, Yamaha F2, Yamaha F25, Yamaha F4, Yamaha F6, Yamaha F8
Features:
| 1. Ergonomic Design: The starter handle is designed to provide a comfortable grip for the user when pulling the starter rope. The handle is typically contoured to fit the hand, reducing strain and making the pull-start process easier. |
| 2. Durability: The handle is built to withstand repeated use, enduring strong pulling forces without breaking or deforming. |
| 3. Weather Resistance: Given the marine environment, the handle is designed to resist exposure to water, salt, and UV radiation, which could degrade less durable materials over time. |
| 4. Recoil Mechanism Integration: The handle is connected to the recoil starter system, which rewinds the starter rope after each pull to prepare for another start if needed. |
What's the function of a Starter Handle?
| 1. Manual Engine Start: The primary function of the starter handle is to manually engage the engine's starting system. By pulling the handle, the rope turns the engine's flywheel, which then cranks the engine and initiates the combustion process. |
| 2. Quick and Reliable Ignition: A strong, quick pull on the starter handle helps ensure the engine starts efficiently, especially on smaller Yamaha outboard motors that rely on manual ignition. |
| 3. Recoil Action: After the handle is pulled, the recoil mechanism automatically retracts the rope into the starter housing, resetting it for the next pull. |
Maintenance Tips:
| 1. Regular Inspection: Inspect the starter handle and rope periodically for signs of wear, such as fraying of the rope or cracks in the handle. If you notice any damage, replace the parts promptly to avoid failure when starting the engine. |
| 2. Lubricate Recoil Mechanism: Ensure that the recoil starter mechanism (which retracts the rope after pulling) is clean and well-lubricated. A sticky or dirty recoil system can cause the rope to retract poorly or not at all. |
| 3. Keep Handle Clean and Dry: After using the outboard motor, wipe the handle dry to prevent salt or moisture buildup. This will prolong the life of the handle, especially if it is exposed to saltwater. |
| 4. Avoid Excessive Force: While the starter handle is built to withstand strong pulls, avoid jerking it too hard or pulling at sharp angles, as this can cause unnecessary wear on the rope and handle. |
| 5. Replace Worn Rope: If the starter rope shows signs of fraying or stiffness, replace it immediately. A broken rope can leave you stranded without a way to start the engine. |
Common Signs of Starter Handle Wear:
| 1. Frayed Rope: Over time, the rope can wear out from constant use or exposure to the elements. Fraying indicates that the rope is nearing the end of its lifespan and should be replaced. |
| 2. Cracks in the Handle: The handle may develop cracks or become brittle if it is exposed to harsh sunlight or cold temperatures for long periods. Cracks can weaken the handle, making it prone to breakage during use. |
| 3. Slow Rope Retraction: If the starter rope does not retract properly, it could indicate a problem with the recoil mechanism or that the rope is worn and stiff. |
The size of the starter handle used in Yamaha outboard motors can vary slightly depending on the specific model and engine size. However, for most Yamaha outboard motors, the typical dimensions of a starter handle are:
| 1. Handle Length: Approximately 3 to 4 inches (7.5 to 10 cm) |
| 2. Handle Width: Around 1 to 2 inches (2.5 to 5 cm) |
| 3. Rope Diameter: The starter rope attached to the handle usually has a diameter of about 5/32 inch to 1/4 inch (4 mm to 6 mm). |
More Products We Have:
| Starter |
2-Stroke Power |
| YAMAHA 63V-15741-00 PAWL,DRIVE |
9.9/13.5/15/40HP |
| YAMAHA 676-15741-00 PAWL,DRIVE |
20/25/25/30/40/50HP |
| YAMAHA 677-15741-01 PAWL,DRIVE |
4/5/6/8/9.9/15HP |
| YAMAHA 6A1-15741-00 PAWL,DRIVE |
2HP |
| YAMAHA 689-15755-00 HANDLE,STARTER |
9.9/15/20/25HP |
| YAMAHA 6F5-15779-02 COVER |
5/8/9.9/15/20/25/30/40/48/50/55/60/75/85HP |
| YAMAHA 6G1-15755-00 HANDLE,STARTER |
4/5/6/8/9.9/13.5/15HP |
| YAMAHA 63V-15713-00 SPRING, STARTER |
9.9/13.5/15HP |
| YAMAHA 66T-15713-00/6F5-15713-00/663-15713-00 SPRING, STARTER |
40HP |
Company Profile
Audited Supplier 
){kind=link}