| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
66T-W0084-00/01/02/03/04-4D
Handle Steering Assy, Yamaha,
For Outboard: Yamaha 40
Functions:
| 1. Directional Control: The primary function is to allow the operator to steer and control the boat's direction. By turning the handle, the entire outboard motor pivots, which changes the boat's course. |
| 2. Throttle Control: The handle typically includes a throttle grip, allowing the operator to adjust the boat's speed. Rotating the grip forward increases speed, while rotating it backward reduces speed, making it easy to accelerate or decelerate smoothly. |
| 3. Gear Shifting: Many Yamaha tiller handles also include a gear shift lever on the handle itself, enabling easy shifting between forward, neutral, and reverse gears. This allows for quick adjustments without moving hands from the handle. |
| 4. Trim and Tilt Adjustment: Higher-end Yamaha models may feature buttons for trim and tilt on the handle. The trim function adjusts the angle of the motor relative to the water, optimizing performance based on speed and water conditions. The tilt function allows the operator to raise the motor when navigating shallow waters or when the boat is out of the water. |
| 5. Emergency Control and Safety: Most handle steering assemblies come with a built-in emergency kill switch, which instantly shuts down the engine if the operator falls overboard or releases the handle unexpectedly. This feature helps improve safety by immediately stopping the motor in case of an emergency. |
| 6. Enhanced Maneuverability at Low Speeds: The handle assembly allows for finer control at lower speeds, making it easier to navigate tight spaces, such as docking or shallow areas, where precise movements are necessary. |
Maintenance Tips:
| 1. Regular Cleaning: Saltwater can cause corrosion, so after each use, rinse the handle assembly with fresh water to remove salt and grime. Wipe it down to prevent moisture buildup that could lead to rust. |
| 2. Lubricate Moving Parts: Apply marine-grade grease to the pivot points and linkages to ensure smooth movement. This should be done periodically, especially if you notice the steering becoming stiff or unresponsive. |
| 3. Check for Loose Connections: Regularly inspect the bolts and screws that connect the handle steering assembly to the motor and tighten them if necessary. Loose connections can make steering less accurate and cause rattling. |
| 4. Inspect the Grip and Wiring: Check the handle grip for wear, especially if it's rubberized, and replace it if it becomes overly worn or loses grip. For models with electronic controls, inspect wiring for wear or corrosion and address issues as soon as possible. |
| 5. Test Throttle and Shift Functions: Regularly test the throttle and gear shift on the handle to make sure they engage smoothly. Sticking or hesitation could indicate a need for adjustment or lubrication. |
| PART NO | DESCRIPTION |
| 66T-W0084-02-4D | HANDLE STEERING ASSY CONJUNTO DE MANIJA |
| 66T-44111-02 | HANDLE, GEAR SHIFT MANIJA DE CAMBIO DE MARCHAS |
| 90387-06M86 | COLLAR ESPACIADOR |
| 97595-06550 | BOLT, WITH WASHER PERNO CON ARANDELA |
| 90201-12M07 | WASHER, PLATE ARANDELA PLANA |
| 90206-12052 | WASHER, WAVE ARANDELA ONDULADA |
| 66T-42123-00 | BOLT, HANDLE JOINT TORNILLO CONEXION DE LA MANIJ |
| 95780-06300 | NUT, FLANGE TUERCA |
| 92995-06200 | WASHER ARANDELA |
| 66T-44124-00 | LINK, SHIFT ROD ESLABON |
| 92990-06200 | WASHER, PLAIN ARANDELA PLANA |
| 90468-18008 | CLIP PRESILLA |
| 6E0-44191-11 | INDICATOR, SHIFT INDICADOR DE CAMBIOS |
| 65W-42101-01-4D | HANDLE, STEERING MANIJA DE DIRECCION |
| 90109-06M86 | BOLT PERNO |
| 65W-42138-00 | LEVER, THROTTLE PLANCA DE ACELERACION |
| 65W-42159-00 | STAY SOPORTE |
| 6G1-42126-00 | FRICTION, STEERING HANDLE GRIP FRICCION DE MANGO DIRECCION |
| 65W-42125-00 | BOLT, FRICTION ADJUSTING TORNILLO FRICCION ADJUSTA |
| 91490-20010 | PIN COTTER CHAVETA |
| 6F6-42177-A0 | RUBBER, HANDLE HULE DE MANIJA |
| 664-42119-00 | GRIP, STEERING HANDLE MANGO, MANIJA DE DIRRECCION |
| 6G1-42137-10 | INDICATOR, THROTTLE INDICADOR ACELERADOR |
| 90269-02M09 | RIVET REMACHE |
| 90149-05M13 | SCREW TORNILLO DE REGLAJE |
| 90201-10M02 | WASHER, PLATE ARANDELA PLANA |
| 90501-23215 | SPRING, COMPRESSION RESORTE DE COMPRESION |
| 90386-08032 | BUSH BUJE |
| 66T-26301-00 | THROTTLE CABLE ASSY CABLE DE ACELERADOR COMPLETO |
| 90446-10M87 | HOSE (L75) TUBO (L75) |
| 90446-10M86 | HOSE (L140) TUBO (L140) |
| 90386-40MA0 | BUSH BUJE |
| 90201-43M00 | WASHER, PLATE ARANDELA PLANA |
| 90206-43M22 | WASHER, WAVE ARANDELA ONDULADA |
| 90202-43M57 | WASHER, PLATE ARANDELA DE PLANA |
| 90386-40M99 | BUSH BUJE |
| 65W-42131-01 | COVER, HANDLE STEERING CUBIERTA MANIJA DIRRECCION |
| 95380-10700 | NUT TUERCA |
| 95780-10300 | NUT, FLANGE TUERCA |
| 65W-42121-01-4D | BRACKET SOPORTE |
| 66T-41273-00 | GROMMET TAPON PROTECTOR |
| 66T-82575-01 | ENGINE STOP SWITCH ASSY INTERRUPTOR DE PARADA COMPL |
| 682-82556-00 | LANYARD, STOP SWITCH RETENER |
| 689-8257Y-00 | CAP TAPA |
){kind=link}