Customization: | Available |
---|---|
After-sales Service: | Yes |
Warranty: | 1 Year |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1. Encases the Water Pump Impeller: The primary function of the water pump housing is to contain the water pump impeller, which is responsible for drawing water from outside the boat and circulating it through the engine for cooling. |
2. Directs Water Flow: The housing directs the flow of water to ensure it reaches the engine's critical components, such as the cylinder head and exhaust system, to prevent overheating. |
3. Seals and Protects: It helps seal the pump assembly, maintaining the correct pressure and preventing water leaks, which could compromise the cooling system's efficiency. |
1. Precision-Fit Design: The housing is designed to precisely fit around the impeller and related components, ensuring optimal water flow and pressure. |
2. Sealing Surfaces: It includes smooth, machined surfaces that work with gaskets and seals to prevent leaks and maintain consistent water pressure. |
3. Heat Resistance: The housing is built to withstand high temperatures generated by the engine and the friction of the rotating impeller. |
1. Regular Inspection: Inspect the water pump housing during routine maintenance to check for cracks, warping, or signs of wear, which could lead to leaks or reduced water flow. |
2. Check for Corrosion: If the housing is made of aluminum, inspect for corrosion, especially if used in saltwater environments. Clean any buildup promptly to prevent damage. |
3. Replace Worn Seals: Ensure that all gaskets and seals associated with the housing are in good condition. Replace them if they show signs of wear to maintain proper water pressure and prevent leaks. |
4. Impeller Replacement: Replace the impeller regularly (often annually or every 100 hours of use) as part of routine maintenance. A worn impeller can damage the housing and reduce cooling efficiency. |
5. Clean Water Inlet Screens: Keep the water inlet screens clean to prevent debris from entering the water pump, which can damage the housing and impeller. |
6. Proper Installation: Ensure the housing is correctly aligned and tightened during reassembly to avoid water leaks and ensure efficient cooling. |
69D-45300-01-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
69D-45300-11-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
69D-45300-21-4D | LOWER UNIT ASSY CONJUNTO UNIDAD INFERIOR |
6H1-45301-03-4D | CASING, LOWER FUNDA INFERIOR COMPLETA |
93315-325V1 | BEARING COJINETE DE RODILLOS |
688-45536-01 | SLEEVE, DRIVE SHAFT CAMISA EJE DE MANDO |
688-45587-01 | SHIM (T:0.10MM) LAINA (T:0.10MM) |
688-45587-10 | SHIM (T:0.12MM) LAINA (T:0.12MM) |
688-45587-20 | SHIM (T:0.15MM) LAINA (T:0.15MM) |
688-45587-30 | SHIM (T:0.18MM) LAINA (T:0.18MM) |
688-45587-40 | SHIM (T:0.30MM) LAINA (T:0.30MM) |
688-45587-50 | SHIM (T:0.40MM) LAINA (T:0.40MM) |
688-45587-60 | SHIM (T:0.50MM) LAINA (T:0.50MM) |
93332-000U3 | BEARING COJINETE |
688-45567-01 | SHIM (T:0.10MM) LAINA (T:0.10MM) |
688-45567-10 | SHIM (T:0.12MM) LAINA (T:0.12MM) |
688-45567-20 | SHIM (T:0.15MM) LAINA (T:0.15MM) |
688-45567-30 | SHIM (T:0.18MM) LAINA (T:0.18MM) |
688-45567-40 | SHIM (T:0.30MM) LAINA (T:0.30MM) |
688-45567-50 | SHIM (T:0.40MM) LAINA (T:0.40MM) |
688-45567-60 | SHIM (T:0.50MM) LAINA (T:0.50MM) |
93332-000W7 | BEARING COJINETE |
90340-08002 | PLUG, STRAIGHT SCREW TORNILLO, DE DRENAJE |
688-45341-10 | PLUG, DRAIN TAPON, DREN |
90430-08020 | GASKET JUNTA |
6H1-45214-00 | COVER, WATER INLET 1 CUBIERTA ENTRADA AGUA 1 |
6H1-45215-00 | COVER, WATER INLET 2 CUBIERTA ENTRADA AGUA 2 |
90151-05M00 | SCREW, COUNTERSUNK TORNILLO EMBUTIDO |
90185-05002 | NUT, NYLON TUERCA AUTOBLOCANTE |
688-45321-00 | PLATE PLACA |
93210-49046 | O-RING ANILLO O |
93106-09014 | OIL SEAL SELLO ACEITE |
97095-06016 | BOLT PERNO |
92995-06600 | WASHER ARANDELA |
6J8-45378-00 | NIPPLE, HOSE (PLUG) NIPLE MANGUERA (TAPON) |
688-44311-01 | HOUSING, WATER PUMP CAJA BOMBA DE AGUA |
69D-44322-00 | INSERT, CARTRIDGE CARTUCHO |
688-44315-A0 | GASKET, WATER PUMP EMPAQUE |
688-44352-03 | IMPELLER IMPULSOR |
90280-04M04 | KEY, WOODRUFF CUNA WOODRUFF |
6D8-44341-01-CA | HOUSING, WATER PUMP CAJA BOMBA DE AGUA |
93450-44166 | CIRCLIP SEGURO |
93101-25M03 | OIL SEAL SELLO ACEITE |
93210-46044 | O-RING ANILLO O |
688-44316-A0 | GASKET, WATER PUMP EMPAQUE |
688-44323-40 | OUTER PLATE, CARTRIDGE PLACA EXTERIOR DEL CARTUCHO |
688-44324-A0 | GASKET, CARTRIDGE EMPAQUE |
93604-10M03 | PIN, DOWEL PASADOR DE CLAVIJA |
90119-08M16 | BOLT, WITH WASHER TORNILLO CON ARANDELA |
90119-08M13 | BOLT, WITH WASHER TORNILLO CON ARANDELA |
69D-45501-00 | DRIVE SHAFT COMP. EJE DE MANDO COMPL. |
69D-45501-10 | DRIVE SHAFT COMP. EJE DE MANDO COMPL. |
69D-45501-20 | DRIVE SHAFT COMP. EJE DE MANDO COMPL. |
6K5-45551-00 | PINION (12T) PINON (12T) |
90170-16M01 | NUT TUERCA |
6K5-45560-00 | GEAR 1 (28T) ENGRANAJE 1 (28T) |
6H1-45611-01 | SHAFT, PROPELLER EJE PROPUSOR |
6H1-45631-01 | CLUTCH, DOG EMBRAGUE DE GARRA |
93603-12M11 | PIN, DOWEL PASADOR DE CLAVIJA |
6H1-45634-02 | SLIDE, SHIFT DESLIZADOR, CAMBIO |
90501-16M65 | SPRING, COMPRESSION RESORTE DE COMPRESION |
93503-16003 | BALL ESFERA |
6H1-45668-00 | SHAFT, FREE EJE |
6H1-45635-00 | PLUNGER, SHIFT EMBOLO DE CAMBIO |
90501-12M48 | SPRING, COMPRESSION RESORTE DE COMPRESION |
90201-03313 | WASHER, PLATE ARANDELA PLANA |
90183-02M03 | NUT, SPRING TUERCA DE RESORTE |
90250-07M02 | PIN, STRAIGHT PASADOR CILINDRICO |
688-45633-00 | RING, CROSS PIN ANILLO DE PASADOR |
6H1-45641-01 | SHIFTER CAMBIO |
6H1-44151-00 | CAM, SHIFT LEVA DE CAMBIO |
6H1-44144-00 | ROD, SHIFT VARILLA DE CAMBIO |
93210-07003 | O-RING ANILLO O |
99001-08600 | CIRCLIP PRESILLA REDONDA |
93450-07M00 | CIRCLIP SEGURO |
6H3-45571-00 | GEAR (28T) ENGRANAJE (28T) |
688-45331-00-94 | HOUSING, BEARING CAJA DE COJINETE |
93306-207U0 | BEARING COJINETE |
688-45577-01 | SHIM (T:0.10MM) LAINA (T:0.10MM) |
688-45577-10 | SHIM (T:0.12MM) LAINA (:0.12MM) |
688-45577-20 | SHIM (T:0.15MM) LAINA (T:0.15MM) |
688-45577-30 | SHIM (T:0.18MM) LAINA (T:0.18MM) |
688-45577-40 | SHIM (T:0.30MM) LAINA (T:0.30MM) |
688-45577-50 | SHIM (T:0.40MM) LAINA (T:0.40MM) |
688-45577-60 | SHIM (T:0.50MM) LAINA (T:0.50MM) |
688-45576-00 | WASHER, THRUST ARANDELA DE EMPUJE AXIAL |
93210-85M97 | O-RING ANILLO O |
93317-325U0 | BEARING COJINETE |
93101-25M03 | OIL SEAL SELLO ACEITE |
90282-04010 | KEY, STRAIGHT CHAVETA, RECTA |
688-45383-02 | WASHER, CLAW ARANDELA DE UNA |
688-45384-00 | NUT TUERCA |