| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 8/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1. Corrosion Protection: The anode provides essential protection against electrochemical corrosion by attracting corrosive reactions, thus safeguarding other metal parts. |
| 2. Sacrificial Design: The anode is intentionally made to be the first part to corrode, thereby "sacrificing" itself to protect other more critical parts of the engine. |
| 3. Easy to Replace: Yamaha anodes are designed for easy access and replacement, allowing boaters to perform simple maintenance without complex tools. |
| 4. Available in Multiple Shapes and Sizes: Depending on the specific motor model, Yamaha offers anodes in various shapes, including bar anodes, disc anodes, and ring anodes, tailored to fit different areas of the motor. |
| 1. Preventing Corrosion: The anode's primary function is to protect exposed metal parts from corrosion by acting as a "sacrificial" metal that corrodes first, preserving the structural integrity of more valuable components. |
| 2. Extending Engine Lifespan: By reducing the corrosion of internal and external metal parts, the anode helps extend the motor's lifespan, improving its reliability over time. |
| 3. Maintaining Optimal Performance: With less corrosion on critical parts, the engine can perform at its best, reducing the likelihood of malfunctions caused by degraded components. |
| 1. Regular Inspection: Check the anode every few months for signs of significant wear. If it has corroded more than halfway, it's time to replace it. |
| 2. Replace When Worn: A worn-out anode cannot provide adequate protection, so it should be replaced as soon as it shows significant corrosion. Never allow an anode to completely dissolve before replacing it. |
| 3. Clean Anode Surface: Gently clean the anode with a brush to remove any buildup or barnacles. Avoid using a wire brush, as this can reduce the anode's effectiveness. |
| 4. Avoid Painting Over the Anode: Painting over or coating the anode can prevent it from functioning properly. Ensure the anode is kept free from any paint or protective coatings. |
| 5. Use the Correct Anode for Water Type: Choose anodes based on the type of water you operate in (zinc for saltwater, aluminum for brackish, and magnesium for freshwater) to ensure optimal performance. |
| 1. Excessive Corrosion: If the anode wears away too quickly, it may indicate unusually high levels of electrolysis. In such cases, check for any electrical faults or grounding issues in the motor. |
| 2. Inadequate Corrosion: If the anode shows little to no corrosion over time, it may not be effectively connected to the metal it is supposed to protect. Ensure all connections are secure, and check for paint or coatings that may prevent contact. |
| 3. Flaking or Pitting: Flaking or pitting is a natural sign of wear on the anode. However, excessive pitting may indicate the need for more frequent inspections and replacements. |
| 4. Incorrect Material for Water Type: Using the wrong material (e.g., zinc in freshwater) can lead to ineffective protection. Match the anode to the water type to prevent issues with corrosion. |
| PART NO. | DESCRIPTION |
| 663-44367-00 | DAMPER, WATER SEAL GOMA DEL SELLO DE AGUA |
| 676-44361-00 | TUBE, WATER TUBO DE AGUA |
| 676-44361-10 | TUBE, WATER TUBO DE AGUA |
| 676-44361-20 | TUBE, WATER TUBO DE AGUA |
| 90202-12060 | WASHER, PLATE ARANDELA DE PLANA |
| 90430-12072 | GASKET JUNTA |
| 6F5-45214-00 | COVER, WATER INLET CUBIERTA ENTRADA AGUA |
| 6F5-45252-00 | SEAT ASIENTO |
| 90152-06M06 | SCREW, COUNTERSUNK TORNILLO EMBUTIDO |
| 93606-12019 | PIN, DOWEL PASADOR DE CLAVIJA |
| 97075-08030 | BOLT PERNO |
| 92995-08100 | WASHER ARANDELA |
| 6F5-45251-02 | ANODE CATODE |
| 90105-06M21 | BOLT, FLANGE TORNILLO |
| 92990-06300 | WASHER, INTERNAL TOOTH ARANDELA PLANA |
| 6E0-45251-12 | ANODE CATODE |
| 95895-06016 | BOLT, FLANGE TORNILLO DE REBORDE |
| 92990-06300 | WASHER, INTERNAL TOOTH ARANDELA PLANA |
| 676-45616-01 | NUT, PROPELLER TUERCA DE HELICE |
| 6F6-45614-00 | PIN, DRIVE PASADOR |
| 91490-40040 | PIN, COTTER CHAVETA |
| 90206-16M03 | WASHER, WAVE ARANDELA ONDULADA |
| 676-45941-62-EL | PROPELLER (3X11-1/2"X11"-H) PROPELA (3X11-1/2"X11"-H) |
| 676-45943-62-EL | PROPELLER (3X11-1/2"X12"-H) PROPELA (3X11-1/2"X12"-H) |
| 676-45945-62-EL | PROPELLER (3X11-3/4"X10"-H) PROPELA (3X11-3/4"X10"-H) |
| 676-45947-62-EL | PROPELLER (3X11-3/4"X8-3/4"-H) PROPELA (3X11-3/4"X8-3/4"-H) |
| 676-45949-62-EL | PROPELLER (3X11-1/2"X13-1/2"-H PROPELA (3X11-1/2"X13-1/2"-H) |
){kind=link}