Detailed Photos
Installation Instructions
Product Description
688-41113-00-1S
Outer Cover, Exhaust, Yamaha,
For Outboard: Yamaha 75, Yamaha 80, Yamaha 85, Yamaha 90
688-41113-00-00
Outer Cover, Exhaust, Yamaha,
For Outboard: Yamaha 80, Yamaha 90
688-41113-00-94
Outer cover, exhaust, Yamaha,
used for repair and maintenance of Yamaha equipment
Features:
1. Heat Shielding: The exhaust outer cover acts as a barrier, protecting surrounding engine components from the high temperatures generated by exhaust gases. |
2. Protective Casing: It encases the exhaust manifold, safeguarding it from external impacts and preventing debris from entering the exhaust system. |
3. Corrosion Resistance: The cover is coated or made from corrosion-resistant materials to withstand marine environments, especially saltwater, which can accelerate rust and corrosion. |
4. Streamlined Design: Designed to fit snugly onto the exhaust system, it minimizes drag and contributes to the outboard motor's hydrodynamics. |
Functions:
1. Directing Exhaust Gases: The primary function of the exhaust outer cover is to help direct exhaust gases away from the engine and underwater, reducing noise and minimizing exhaust exposure to the boat. |
2. Thermal Insulation: It helps insulate and contain heat within the exhaust system, preventing heat from spreading to nearby components, which could cause overheating or damage. |
3. Protection Against Corrosion: By providing a sealed, corrosion-resistant layer, it protects the internal exhaust components from moisture and salt, prolonging their lifespan. |
4. Noise Reduction: The cover helps dampen some of the noise produced by the exhaust, resulting in quieter operation. |
Maintenance Tips:
1. Regular Cleaning: Rinse the exhaust outer cover with fresh water after each use, especially in saltwater. This helps remove salt deposits and prevent corrosion. |
2. Inspect for Corrosion or Cracks: Periodically check for any signs of rust, cracks, or deformation. Corrosion can compromise the cover's integrity, while cracks or warping may affect its ability to shield and insulate. |
3. Monitor Temperature Consistency: If you notice the engine compartment getting excessively hot, this could indicate an issue with the exhaust cover, such as improper insulation or damage. |
4. Tighten Fasteners: Ensure that all bolts and screws holding the exhaust cover in place are securely fastened. Vibration during operation can loosen these connections over time. |
5. Apply Anti-Corrosive Spray: For extra protection, apply a marine-grade anti-corrosive spray to the cover, especially if the outboard is frequently used in saltwater. |
Common Signs of Failure:
1. Overheating: If the engine overheats more frequently, it could indicate that the exhaust cover isn't effectively insulating the heat, possibly due to wear or damage. |
2. Increased Noise Levels: If there's a noticeable increase in exhaust noise, it could be a sign that the cover is cracked, loose, or damaged, allowing more sound to escape. |
3. Visible Rust or Corrosion: Any visible corrosion, pitting, or rust indicates that the cover's protective coating or material is deteriorating, which could lead to further damage if not addressed. |
4. Exhaust Leaks: Visible exhaust gas leaking from around the cover or unusual smells can indicate gaps, cracks, or poor sealing, which should be resolved to maintain optimal engine function. |
More Products We Have:
BEARING |
HOUSING,WATER PUMP |
BOLT / SCREW |
IMPELLER |
BUSHING / COLLAR |
VALVE / JET,MAIN |
BRACKET |
KEY,WOODRUFF |
CABLE, REMOTE/STEERING / |
MOUNT DAMPER |
THROTTLE/STEERING SYSTEM |
NUT |
CAP LOWER CASING |
OIL SEAL |
CARBURETOR ASSY / REPAIR KIT |
O-RING |
CDI / CABLE,BATTERY / RELAY ASSY |
OUTER PLATE |
COIL / PLUG,SPARK |
PIN,CROSS/DRIVE/ |
CARTRIDGE INSERT |
STRAIGHT/COTTER |
CLIP |
PISTON |
CLUTCH DOG / BALL |
PISTON PIN |
CONNECTING ROD |
PISTON RING |
CRANK PIN |
PROPELLER |
CRANKSHAFT |
PROPELLER SHAFT |
DIAPHRAGM |
WATER PUMP REPAIR KIT |
DAMPER, WATER SEAL |
REMOTE CONTROL ASSY |
DRIVE SHAFT |
SEAL,LABYRINTH |
FILTER |
SLEEVE LINER |
FUEL PUMP |
SPACER |
FUEL PARTS |
SPRING |
FLOAT |
STARTER |
GASKET |
SWITCH ASSY |
GASKET KIT |
THERMOSTAT |
GEAR / PINION ASSY |
WASHER/SHIM |
TAB-TRIM |
ANODEIN |
NEW GEAR |
|
Company Profile