| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1. Sealing Mechanism: The primary feature of the water seal damper is its ability to create a watertight seal around specific parts of the motor, such as the drive shaft, preventing water from entering the engine's interior. |
| 2. Damping Effect: It also functions as a damping mechanism, reducing vibrations and noise that could result from the flow of water or the movement of components like the drive shaft. |
| 3. Precision Fit: Designed to fit perfectly within the outboard motor assembly, the water seal damper ensures no gaps or leaks that could compromise the water sealing function. |
| 1. Prevents Water Intrusion: The water seal damper prevents water from entering areas of the engine where it could cause damage, such as the crankcase, bearings, and lower unit. |
| 2. Ensures Proper Cooling System Operation: By sealing the cooling system effectively, the damper ensures that water is directed only where needed, preventing leakage and allowing the cooling system to operate efficiently. |
| 3. Reduces Noise and Vibration: As a damping component, it helps reduce noise and vibrations from the movement of the motor's components, contributing to smoother and quieter operation. |
| 1. Diameter: The diameter of the seal is usually designed to fit snugly around the shaft or other components, typically ranging from 0.5 to 2 inches (12 to 50 mm). |
| 2. Thickness: The thickness of the damper is also important to ensure a proper seal and damping effect, usually between 0.2 to 0.5 inches (5 to 12 mm). |
| 3. Custom Fit: Each water seal damper is specifically designed to match the configuration of the outboard motor it is installed on, ensuring a perfect fit and effective sealing. |
| 1. Regular Inspection: Periodically check the water seal damper for signs of wear, cracks, or damage, especially if the motor is frequently used in saltwater or harsh conditions. Damaged seals can lead to water intrusion and cause engine problems. |
| 2. Replace When Worn: If you notice that the damper is worn, cracked, or degraded, it should be replaced immediately. A compromised seal can allow water to enter the motor, leading to corrosion or damage to critical components. |
| 3. Lubrication: Some manufacturers recommend applying a small amount of marine-grade grease to the damper and surrounding seals during installation to help maintain flexibility and ensure a secure fit. |
| 4. Flush After Use: After using the outboard motor in saltwater, flush the engine with fresh water to remove salt and prevent corrosion. This helps prolong the life of the water seal damper and other rubber components. |
| 5. Check for Leaks: Regularly check for any signs of water leaking from the lower unit or areas around the drive shaft. Water leakage could indicate that the damper or other seals have failed and need replacement. |
| 6. Monitor Engine Performance: If the engine starts running rough, or if you notice overheating or other performance issues, inspect the water seal damper and cooling system to ensure that water is not entering areas it shouldn't. |
| 1. Water Leaks: If you notice water leaking from around the drive shaft or other sealed areas, it's a clear sign that the water seal damper may be damaged or worn out. |
| 2. Increased Vibrations or Noise: Excessive vibration or noise from the engine could indicate that the damper is no longer effectively damping vibrations or sealing properly. |
| 3. Overheating or Water Intrusion: Water intrusion into the lower unit or powerhead, often caused by a damaged or failing water seal damper, can lead to overheating or engine failure. |
| PART NO | DESCRIPTION |
| 626-44365-01 | DAMPER, WATER SEAL HULE DE SELLO DE AGUA |
| 682-44361-01 | TUBE, WATER TUBO DE AGUA |
| 6B4-44361-10 | TUBE, WATER TUBO DE AGUA |
| 6B4-44361-30 | TUBE, WATER TUBO DE AGUA |
| 93606-12019 | PIN, DOWEL PASADOR DE CLAVIJA |
| 97075-08035 | BOLT PERNO |
| 92995-08600 | WASHER ARANDELA |
| 6E7-45214-00 | COVER, WATER INLET 1 CUBIERTA ENTRADA AGUA 1 |
| 97880-05012 | SCREW, PAN HEAD TORNILLO DE CABEZA CON PLANA |
| 6B4-45251-00 | ANODE CATODE |
| 95895-06020 | BOLT, FLANGE TORNILLO DE REBORDE |
| 92990-06300 | WASHER, INTERNAL TOOTH ARANDELA PLANA |
| 682-45375-01 | DAMPER, SEAL GOMA DE SELLO |
| 6E7-45987-01 | SPACER ESPACIADOR |
| 90201-10M01 | WASHER, PLATE ARANDELA PLANA |
| 90171-10M01 | NUT, CASTLE TUERCA ENTALLADA |
| 91490-30020 | PIN COTTER CHAVETA |
| 683-45941-00-EL | PROPELLER (3X9-1/4"X12"-J) PROPELA (3X9-1/4"X12"-J) |
| 683-45943-00-EL | PROPELLER (3X9-1/4"X10-1/2"-J) PROPELA (3X9-1/4"X10-1/2"-J) |
| 683-45947-00-EL | PROPELLER (3X9-1/4"X8"-J) PROPELA (3X9-1/4"X8"-J) |
| 683-45949-00-EL | PROPELLER (3X9-1/2"X6-1/2"-J) PROPELA (3X9-1/2"X6-1/2"-J) |
| 683-45952-00-EL | PROPELLER (3X9-1/4"X9-3/4"-J) PROPELA (3X9-1/4"X9-3/4"-J) |
| 63V-45943-10-EL | PROPELLER (3X9-1/4"X11"-J1) PROPELA (3X9-1/4"X11"-J1) |
| 63V-45945-10-EL | PROPELLER (3X9-1/4"X9"-J1) PROPELA (3X9-1/4"X9"-J1) |
| 63V-45947-00-EL | PROPELLER (3X9-1/4"X8"-J) PROPELA (3X9-1/4"X8"-J) |
| 63V-45952-10-EL | PROPELLER (3X9-1/4"X10"-J1) PROPELA (3X9-1/4"X10"-J1) |
| 683-W4591-02-EL | PROPELLER (3X9-3/4"X8"-J) PROPELA (3X9-3/4"X8"-J) |
| 683-W4592-02-EL | PROPELLER (3X9-3/4"X6-1/2"-J) PROPELA (3X9-3/4"X6-1/2"-J) |
| 6E7-45986-00 | RING, DEFLECTOR ANILLO REFLECTOR |
| 90171-10M07 | NUT, CASTLE TUERCA ENTALLADA |
| 90201-10M02 | WASHER, PLATE ARANDELA PLANA |
){kind=link}