| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 9/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1. Precision Fit: The oil seal housing is designed with high precision to perfectly fit Yamaha outboard motors. This ensures that the oil seal operates effectively by creating a tight, secure fit that prevents oil leaks and external contamination. |
| 2. Durability: Built to endure the harsh marine environment, the oil seal housing is made from strong, corrosion-resistant materials, which are designed to last through constant exposure to water, salt, and extreme temperature changes. |
| 3. Protection Against Leaks: By securely holding the oil seals in place, the housing prevents oil from escaping from the motor's critical systems, ensuring that the internal components remain well-lubricated and protected from wear and tear. |
| 4. Water and Debris Protection: The housing not only ensures that oil stays within the motor but also prevents water, dirt, and other contaminants from entering the motor. This is especially important in outboard motors, which are constantly exposed to the marine environment. |
| 1. Oil Containment: The primary function of the oil seal housing is to contain the oil used in various engine assemblies such as the crankshaft, propeller shaft, and gear case, preventing oil leaks that could damage the motor or reduce its efficiency. |
| 2. Maintaining Lubrication: The housing holds the oil seals in place to ensure that all critical moving parts remain properly lubricated, reducing friction and preventing excessive wear. This helps extend the life of the motor and ensures smooth operation. |
| 3. Preventing Contamination: The housing helps keep external elements such as water, dirt, and debris from entering the engine, which could otherwise cause contamination and lead to significant damage or failure of internal components. |
| 4. Enhancing Engine Performance: By keeping oil in and contaminants out, the oil seal housing ensures that the engine runs smoothly and efficiently, reducing the risk of performance issues related to poor lubrication or contamination. |
| 1. Regular Inspection: Regularly inspect the oil seal housing for signs of wear, such as oil leaks, cracks, or physical damage. Early detection of issues can prevent more severe damage to the motor. |
| 2. Replace Seals When Necessary: If oil leaks or contamination are detected, it may be necessary to replace the oil seals within the housing. Oil seals can wear out over time due to heat, pressure, and friction, so replacing them when they show signs of wear will ensure the motor stays properly lubricated. |
| 3. Check for Water Contamination: Water intrusion in the engine can cause significant damage. If you notice milky oil (a sign of water contamination), it may indicate that the oil seal or housing is damaged and requires repair or replacement. |
| 4. Lubricate Moving Parts: Ensure that the motor's lubrication system is functioning properly, as poor lubrication can put additional strain on the seals and housing. Keep oil levels consistent and use the correct type of oil for your motor as recommended by Yamaha. |
| 5. Avoid Overheating: Excessive heat can cause oil seals to degrade more quickly, leading to oil leaks. Make sure the engine cooling system is working properly to avoid overheating, which could impact the performance of the oil seals and housing. |
| 6. Flush the Motor After Use: If you use your outboard motor in saltwater environments, flush the engine with fresh water after each use. Salt and other minerals can corrode the housing and affect the performance of the oil seals over time. |
| PART NO | DESCRIPTION |
| 6F6-W0090-04-1S | CRANK CYLINDER ASSY BLOQUE MOTOR COMPLETO |
| 6J4-W0090-10-1S | CRANK CYLINDER ASSY BLOQUE MOTOR COMPLETO |
| 6F6-15100-00-1S | CRANKCASE ASSY CARTER COMPLETO |
| 6J4-15100-10-1S | CRANKCASE ASSY CARTER COMPLETO |
| 624-14485-00 | PIPE, JOINT TUBO DE UNION |
| 650-11370-01 | CHECK VALVE ASSY VALVULA DE CONTROL COMPL |
| 93608-12063 | PIN, DOWEL PASADOR DE CLAVIJA |
| 90119-10005 | BOLT, WITH WASHER TORNILLO CON ARANDELA |
| 6F5-15396-01-5B | HOUSING, OIL SEAL CAJA DE SELLO DE ACEITE |
| 93101-30M33 | OIL SEAL SELLO ACEITE |
| 93104-16M01 | OIL SEAL SELLO ACEITE |
| 93210-65M50 | O-RING ANILLO O |
| 93210-22M02 | O-RING ANILLO O |
| 93440-68M03 | CIRCLIP SEGURO |
| 91690-30010 | PIN, SPRING PASADOR DE RESORTE |
| 676-45251-00 | ANODE CATODE |
| 97095-06016 | BOLT PERNO |
| 92995-06600 | WASHER ARANDELA |
| 676-11325-00 | ANODE ANODO |
| 90141-06M00 | SCREW, COUNTERSUNK TORNILLO RANURADO |
| 6F5-11119-00 | HANGER, ENGINE SOPORTE DEL MOTOR |
| 90101-08001 | BOLT TORNILLO |
| 6F6-11111-00-1S | HEAD, CYLINDER 1 CULATA CILINDRO 1 |
| 6F5-11181-A1 | GASKET, CYLINDER HEAD 1 JUNTA, DE CULATA 1 |
| 90119-08MA5 | BOLT, WITH WASHER TORNILLO CON ARANDELA |
| 6F6-11191-00-1S | COVER, CYLINDER HEAD 1 TAPA CULATA DE CILINDRO 1 |
| 6F6-11193-A1 | GASKET, HEAD COVER 1 EMPAQUE |
| 90480-18065 | GROMMET TAPON |
| 663-12416-00 | VALVE, PRESSURE CONTROL VALVULA DE CONTROL DE PRESION |
| 90501-14M02 | SPRING, COMPRESSION RESORTE DE COMPRESION |
| 90340-14036 | PLUG, STRAIGHT SCREW TORNILLO, DE DRENAJE |
| 90119-06MA3 | BOLT, WITH WASHER TORNILLO CON ARANDELA |
| 90430-14115 | GASKET JUNTA |
| 6F5-12411-02 | THERMOSTAT TERMOSTAT |
| 6E9-12413-00-1S | COVER, THERMOSTAT CUBIERTA TERMOSTATO |
| 6E9-12414-A1 | GASKET, COVER EMPAQUE |
| 90119-06MA4 | BOLT, WITH WASHER TORNILLO CON ARANDELA |
| 6F5-41113-01-1S | OUTER COVER, EXHAUST CUBOERTA EXTERIOR DE ESCAPE |
| 650-24378-00 | PIPE, JOINT 4 TUBO DE UNION 4 |
| 6F5-41112-A0 | GASKET, EXHAUST INNER COVER EMPAQUE |
| 6F5-41111-01-1S | INNER COVER, EXHAUST CUBIERTA INTERIOR DE ESCAPE |
| 6F5-41114-A0 | GASKET, EXHAUST OUTER COVER EMPAQUE |
| 90119-06MA3 | BOLT, WITH WASHER TORNILLO CON ARANDELA |
| 90445-09M37 | HOSE (L240) TUBO (L240) |
| 94702-00040 | PLUG, SPARK BUJIA |
| 94702-00272 | PLUG, SPARK BUJIA |
){kind=link}